穿越小说排行榜,遮天

Products

MS adhesive

Home >> Products >> Single component silicone... >> MS adhesive

JDB9037B Silane Modified Sealant

JDB9037B is a one-component silicone modified sealant. Without primer, the product has a wide range ofadhesive properties, good anti-weathering, anti-ultraviolet and anti-aging properties, no isocyanate, PVC, no solvent, friendly to human body, health and environmental protection.

Feedback

Feature

● No need for primer, suitable for a variety of materials, excellent bonding and sealing.
● Excellent corrosion resistance, aging resistance, UV resistance.
● Good lacquering performance, environmentally friendly, solvent free.

● Simple construction, effective cushioning stress, shock absorption and avoiding deformation of profilescaused by welding.

Parameter

項目	單位	參數	測試標準
固化前物性/ Physical properties before curing（23±2℃/50±5%RH ）
外觀/ Appearance	--	黑色膏狀物 white cream	--
表干時間/ Skin-forming time	min	5~30	GB/T 13477.5-2002
固化速度/ Curing time（24hr）	mm	≥2.0	GB/T 13477.2-2002
相對密度/relative density	g/cm³	1.36±0.05	--
固化后物性/ Physical properties after curing（23±2℃/50±5%RH ×7days）
邵 A 硬度/ Hardness Shore A	Shore A	40~50	GB/T 531.1—2008
拉伸強度/Tensile strength	MPa	≥2.0	GB/T 528—2009
拉斷伸長率/ Elongation at break	%	≥200	GB/T 528—2009
剪切強度/ Shear strength	MPa	≥2.0	GB/T 7124—2009
介電強度/ dielectric strength	（kV/mm）	≥20	GB/T1698—2005
體積電阻率/ volume resistivity	(Ω · cm）	≥1.0×1014	GB/T1692—2008
施工溫度/Application temperature	℃	5~40	--
應用溫度范圍/ In service temperaturerange	℃	-50~ 110	--
短期耐溫/Short exposure (up to 2 hr) (2hr 內)	℃	130	--

application

It can bond a wide range of materials, particularly suitable for bonding and sealing of metal, plastic and other materials. It’s applicable to the bonding and sealing of passenger cars, trains, heavy truck cab, ships, containers, ventilation piping and other parts.

Usage method

Instructions

● Please test effect of adhibiting the materials in advance. The surface must be dry and free from foreignmatters prior to application. Cut a appropriate caliber of plastic beak and coat sealant fully on the bonding surface using manual or automatic glue gun. Then bond and fix the parts. Clean residual glue finally

Limitations
● Please refer to MSDS in detail before use;
● Apply the sealant in well-ventilated area. Avoid contact with skin and eyes, if skin and eyes contact occurs, wash thoroughly and then go to see a doctor; if swallowed, go to see a doctor immediately.

Package specification
● This product uses 300ml hard tube packaging and 600ml soft package packaging.

Storage and transportation
● This product should be sealed and stored in a cool and dry environment at a temperature ranging from 8 ℃ to27 ℃.
● The shelf life of the product is 12 months. See the packaging tube for the production batch number and shelf life.
● This product is a non dangerous product and is stored and transported as general chemicals.

日韩无卡一区二区三区视频_免费无码真人国产_欧美日韩激情黄色大片_亚洲国产精品日韩久久_国产三级av一区二区三区_国产成人精品.一二区_非洲黑人高清一级毛片_亚洲日韩在线影院_av免费在线观中国_四虎影视永久无码观看

Single component silicone

Thermal conductive materials

Silicone potting adhesive

gel

polyurethane

IGBT packaging adhesive

Three proof paint

Home >> Products >> Single component silicone... >> MS adhesive

Feature

Parameter

application

Usage method